Quality 1808 Cw Ultra-Bright SMD LED

• Customization: Available
• LED Packaging Type: Chip
• Chip Material: AlGaInP
• Model NO.: S1808CW2CUN-A03
• Beam Angle: 120°
• Emitting Color: Cool White
• IP Rating: IP68
• Base Material: Copper
• LED Chips: Sanan
• Life: 30000h
• Certification: RoHS
• Power Dissipation: 60MW
• Peak Forward Current: 100mA
• Reverse Voltage: 5V
• Luminous Intensity: 1800-2400mcd
• Viewing Angle: 120°
• Electrostatic Discharge: 2000V
• Reverse Current: 8000-25000K
• Transport Package: Carton
• Trademark: RZXLED
• Origin: China
• Production Capacity: 100000000/Week
• Package Size: 2.00cm * 2.00cm * 1.00cm
• Package Gross Weight: 0.010kg

Product Description

Product Description

Item	S1808CW2CUN-A03
Brand Name	RZXLED
Power Dissipation	60mW
Peak Forward Current	100mA
Chip Viewing Angle	120°
Reverse Voltage	5V
Luminous Intensity	1800-2400mcd
Reverse Current	8000-25000k
Electrostatic Discharge	2000V

 

Feature

Package 

1.Package ( L/W/H ) : 1.8×0.8×0.5 mm
 

2.Color: Ultra Bright Standard White 

3.Lens:  Yellow Diffuse Flat Mold

4.EIA STD Package
 

5.Meet ROHS, Green Product

 

6.Compatible With SMT Automatic Equipment

 

7.Compatible With Infrared Reflow Solder Process

Package Profile

Soldering Profile Suggested

Reel And Tape Dimensions

Cautions

Application:
1.A LED is a current-operated device. The slight shift of voltage will cause big change of current, which will damage LEDs. Customer should use resistors in series for the Over-Current-Proof
2.In order to ensure intensity uniformity on multiple LEDs connected in parallel in an application, it is recommended to use individual resistor separately, as shown in Circuit A below. The brightness of each LED shown in Circuit B might appear difference due to the differences in the I-V characteristics of those LEDs.
3.High temperature may reduce LEDs' intensity and other performances, so keeping it away from heat source to get good performance is necessary.

Storage:
1.Before opening original package, it is recommended to store them in the following environment:Temperature: 5ºC~30ºC,Humidity: 85%RH max.When the inventory over 3 months,Should be done before treatment using dehumidification, Temperature: 60ºC/8 hours.
2.After opening original package, the storage ambient for the LEDs should be in 5~30°C temperature and 60% or less relative humidity
3.In order to avoid moisture absorption, it is recommended that the LEDs that out of the original package should be stored in a sealed container with appropriate desiccant, or in desiccators with nitrogen ambient.
4.The LEDs should be used within 168hrs (7days) after opening the package. Once been mounted, soldering should be quick.
5.If the moisture absorbent material (silica gel) has faded away or the LEDs stored out of original package for more than 168hrs (7 days), baking treatment should be performed using the conditions: 60ºC at least 24 hours.

ESD (Electrostatic Discharge )-Protection:
A LED (especially the Blue,White and Green product) is an ESD sensitive component, and static electricity or power surge will damage the LED. ESD-damaged LEDs will exhibit abnormal characteristics such as high reverse leakage current, low forward voltage, or "no light-up" at low currents,

etc.Some advice as below should be noticed:
1.A conductive wrist strap or anti-electrostatic glove should be worn when handling these LEDs
2.All devices, equipment, machinery, work tables and storage racks, etc. must be properly grounded (Grounding impedance value within 10Ω)
3.Use anti-static package or boxes to carry and storage LEDs. And ordinary plastic package or boxes is forbidden to use.
4.Use ionizer to neutralize the static charge during handling or operating.
5.All surfaces and objects within 1 ft close to LEDs measure less than 100V.

Cleaning
Use alcohol-based cleaning solvents such as IPA (isopropyl alcohol) to clean LEDs if necessary

Soldering
1.Reflow soldering should not be done more than 2 times.
2.Manual soldering is only suggested on repair and rework. The maximum soldering temperature should not exceed 300°C within 3 sec. And the maximum capacity of soldering iron is 30W in power.
3.During the soldering process, do not touch the lens at high temperature.
4.After soldering, any mechanical force on the lens or any excessive vibration shall not be accepted to apply, also the circuit board shall not be bent as well.

Others
1.The LEDs described here are intended to be used for ordinary electronic equipment (such as office equipment, communication equipment and household applications).Consult Sales in advance for the applications in which exceptional reliability is required, particularly when the failure or malfunction of the LEDs may directly jeopardize life or health. (such as in aviation, transportation, traffic control equipment, medical and life support systems and safety devices).
2.The light output from the high luminous intensity LEDs may cause injury to human eyes when viewed directly.
3.The appearance and specifications of the product may be modified for improvement without prior notice.

Company Profile