Factory Price 850nm 5MW 60º C Infrared Laser

• Customization: Available
• LED Packaging Type: Chip
• Chip Material: AlGaInP
• Model NO.: 850nm-5mW-Laser
• Beam Angle: 120°
• Emitting Color: Infrared
• IP Rating: IP33
• Power: 5MW
• Life: 100000h
• Certification: RoHS
• Voltage(V): 1.8-2.5V
• Wavelength: 845-855nm
• Current: 5-20mA
• Warranty(Year): 1 Year
• Operating Temperature: -10° -- 60°
• Slope Efficiency: 0.4-0.9MW/Ma
• Monitor Current: 0.2-0.6deg
• Laser Diode Reverse Voltage: 2V
• Photo Diode Reverse Voltage: 30V
• Transport Package: Carton
• Specification: 5.6mm Package
• Trademark: RZXLED
• Origin: China
• Production Capacity: 1000000/Week
• Package Size: 15.00cm * 10.00cm * 5.00cm
• Package Gross Weight: 0.100kg

Product Description

Product Description

Item	850nm-5mW-Laser
Brand Name	RZXLED
Power	5mW
Operating Voltage	1.8-2.5V
Wavelength	845-855NM
Operating Current	12-30MA
Monitor Current	0.2-0.6deg
Slope Efficiency	0.4-0.9mW/mA

 

Package Dimensions

Note:
Tolerance is ± 0.05mm for items without tolerance marking 

Application&Feature

 

Application

Industrial Optical Sensor
3D Sensing
VR&AR
Laser Lidar

 

Feature

 850nm Infrared Laser
CW laser (Continuous Wave)
Single Transvers / TE mode laser
5.6mm Package

PACKAGING

Precautions

 

1) Absolute maximum ratings The absolute maximum ratings which must not be exceeded even momentarily have been established for over driving laser operation reason such as COD. Exercise particular caution with respect to the drive voltage supply and static electricity.

2) Prevention of surge current and electrostatic discharge(ESD) and surge stress Laser diode is sensitive device to ESD and surge, so even an extremely short time, laser diode damaged with the strong light emitted. Use the power supply that was designed not to exceed the optical power output specified at the absolute maximum ratings We advise talking the following protective measures -. Ground the device and circuits -. When working with laser diodes wear anti-static clothing. Grounded wrist straps should always be worn while working with laser diodes. -. Use anti-static containers for transport and storage. -. Laser diode deterioration and damage can occur due to excessive current spikes when the power is turned on or off. Design circuits to avoid the generating of excessive current spikes

3) Soldering When soldering, please give attention to the mechanical stress and the temperature. Temperature of die-pad portion should be less than 200ºC. It is recommended to radiate heat by putting heat sink on the package.
*Soldering temperature and time : Iron temperature less than 350ºC within3sec (leads only)

4) Eye Safety When the laser diode is in operation, looking into laser beam directly by naked eyes, even through a lens, microscope or optical fibers, may cause severe damage to human eyes. For observing laser beams, using safety goggles is recommended

Company Profile