3535 1W Chip Size20mil, 290-300nm Flat UVB LED

• Customization: Available
• LED Packaging Type: Chip
• Chip Material: InGaN
• Model NO.: 3535
• Beam Angle: 120°
• Emitting Color: UV
• IP Rating: IP33
• Base Material: Copper
• LED Chips: Sanan
• Power: 1W
• Life: 30000h
• Certification: RoHS
• Brightness: 20-25MW
• Size: 3.5*3.5*1.5mm
• Voltage: 5-6.5V
• Wavelength: 290-300nm
• Current: 150mA
• Warranty(Year): 1 Year
• Storage Temperature(ºC): -30° -- 60°
• Transport Package: Carton
• Specification: 1000 PCS/Roll
• Trademark: RZXLED
• Origin: China
• Production Capacity: 1000/Week
• Package Size: 3.00cm * 3.00cm * 2.00cm
• Package Gross Weight: 0.001kg

Product Description

Product Description

Item	3535-295NM-05W-L
Brand Name	RZXLED
Power	1W
Voltage	5-6.5V
Viewing Angle	120
Wavelength	290-300NM
Forward Current	150mA
Luminous Flux	20-25mW
Package(pcs/roll)	1000Pcs/roll
Size	3.5*3.5*1.5MM

Package Dimensions

Note:In order to have a stable output, UV LED need a very good heat release enviroment or a good heat release system. We suggest the temperature of holder could not be over 50ºC when LED is working.

Application

 

1. Disinfection

2. Fluorescent Spectroscopy

3. Sensor Light

4. Skin treatment

5. vitiligo

6. dry moss

7. medical equipment

 

Notes

1. LED storage: suggest to sealed stock in under the temperature of 10ºC-55ºC,humidity of 30%-65%.In order to keep a good quality, pls use it within 1 year after the prodcution date;and use it out within 28days after open the package.

2. When taking or touch the LED, pls make sure to wear the gloves. Seal the package in time in orde to avoid the pin oxidation. When openning the package, need to use the weezers clamped on both sides of LED in order not to touch the face of the LED.

3. Installation: This process is mainly to protect the static electricity:
    (1) Check if the grounding wire of the machine equipment is normal before production;
    (2) heck if the static ring is normal, check static metal and human skin contact closely;
    (3) Check if the workerswear anti-static gloves;
    (4) Check if the working table is paved with electrostatic rubber cloth, and the rubber cloth is connected to each other.
    (5) After opening the seal, it is better to use it out in 24hors, otherwise it may cause the oxidation of the foot.

4. With the increase of current and temperature, the life of LED will decrease, which leads to the acceleration of the attenuation of LED.

5. It is suggested that a grounding circuit should be used in the design of PCB. Pay special attention to the usage environment of LED: the temperature is between -30ºC to 55ºC, and the humidity is between 65%. Otherwise, the LED will be broken by electrostatic and high current breakdown.

Company Profile

Certifications

 

Packaging & Shipping

 

Our Advantages

FAQ