10MW 780nm Invisible Single Mode Laser Diode Infrared Laser

• Customization: Available
• LED Packaging Type: Chip
• Chip Material: AlGaInP
• Model NO.: 780nm-5mw
• Beam Angle: 60°
• Emitting Color: 775-800nm
• IP Rating: IP33
• LED Chips: Sanan
• Life: 10000
• Certification: RoHS, CE
• Lifetime: 10000 Hours
• Specification: 15*10*4cm
• Origin: China
• HS Code: 8541410090
• Package Size: 15.00cm * 10.00cm * 5.00cm
• Package Gross Weight: 0.500kg

Product Description

Product Description

 

Item	ir laser
Peak Wavelength	775-800NM
Radiant Flux	5 mW
LD Reverse Voltage	2V
PD Reverse Voltage	30V
Forward Current	5-30MA

 

- 780nm 5mW 

- Infrared Laser

• Features

- 780nm Infrared Laser

- CW laser (Continuous Wave)

- Single Transvers / TE mode laser

-

• Application

- Industrial Optical Sensor

5.6mm Package

Warm Tip:The above parameters are for reference. Wavelength Angle, PCB can be customized Eccording to requirements

PRECAUTIONS

 

 

 

1) Absolute maximum ratings

 

 

The absolute maximum ratings which must not be exceeded even momentarily have been

established for over driving laser operation reason such as COD. Exercise particular caution

with respect to the drive voltage supply and static electricity.

2) Prevention of surge current and electrostatic discharge(ESD) and surge stress

 

 

 

 

Laser diode is sensitive device to ESD and surge, so even an extremely short time,

laser diode damaged with the strong light emitted.

Use the power supply that was designed not to exceed the optical power output

specified at the absolute maximum ratings

We advise talking the following protective measures

-. Ground the device and circuits

-. When working with laser diodes wear anti-static clothing.

Grounded wrist straps should always be worn while working with laser diodes.

-. Use anti-static containers for transport and storage.

-. Laser diode deterioration and damage can occur due to excessive current

spikes when the power is turned on or off.

Design circuits to avoid the generating of excessive current spikes

3) Soldering

When soldering, please give attention to the mechanical stress and

the temperature. Temperature of die-pad portion should be less than 200ºC.

It is recommended to radiate heat by putting heat sink on the package.

Soldering temperature and time : Iron temperature less than 350ºC within3sec (leads only)

4) Eye Safety

When the laser diode is in operation, looking into laser beam directly by naked eyes, even

through a lens, microscope or optical fibers, may cause severe damage to human eyes. For

observing laser beams, using safety goggles is recommended

Production Process

Certifications

Company Profile

FAQ

Q1: Do you supply OEM,ODM service?
A1: YES,absolutely it can be realized.
 
Q2: All the pictures are real photo?
A2: Yes, the pictures of all products on this page are 100% real shoot by us.
 
Q3: How can I get a quotation from you?
A3: Please kindly leave us messages about your needs,including products and quantity,our professional team will reply you very
soon (mostly within 6 hours).
 
Q4. Can I have a sample order for led light?
A4: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
 
Q5: How to place an order?
A5: If you want to place an order, Please feel free to send us an inquiry email or contact us by trademanager online, we will
reply you within 6hours(working day).
 
Q6. What about the lead time?
A6:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than
 
Q7. How do you ship the goods and how long does it take to arrive?
A7: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
 
Q8. Is it OK to print my logo on led light product?
A8: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.